NOTES:  	
---------------------	
* This model is copyright J.P. Brown (c) 2001	
* Some files (including the main model -- mq-all.dat) contain unofficial parts required for display.  	
* The recommended viewer is MLCAD (or other viewer capable of dealing with unofficial parts)	
* Axles have been colored RED to aid visibility (exception: the ""5.5L axle with stop bush"" parts have been colored WHITE)"	
* Electrical and pneumatic tube runs are indicated only at their ends -- see the notes in the DAT	
for additional information	

Unofficial parts (included in this ZIP)	
--------------------	
32291.dat	Technic Axle Joiner Perpendicular w/ Double Peghole (needs work)
6585.dat	Technic Gearbox  4 x  4 x 2&2/3
fsh10.dat	"Technic Flex-System Hose, 10L"
fsh12.dat	"Technic Flex-System Hose, 12L"
fsh16.dat	"Technic Flex-System Hose, 16L"
p_larm.dat	Technic pneumatic: large piston arm
p_lbase.dat	Technic pneumatic: 2x2 base (subpart)
p_lcyl.dat	Technic pneumatic: large piston cylinder
p_parmns.dat	Technic pneumatic: large pump arm (no spring)
p_pmp.dat	Technic pneumatic: large pump cylinder
p_sarm.dat	Technic pneumatic: small piston/pump arm
p_scyl.dat	Technic pneumatic: small piston cylinder
p_swtch.dat	Technic pneumatic: switch
p_swtcl.dat	Technic pneumatic: switch lever
p_tb_end.dat	Technic pneumatic: tube-to-nozzle marker
p_tjnc.dat	Technic pneumatic: T-junction (Type II)
p-nozzle.dat	Technic pneumatic: pneumatic nozzle
rbc1.dat	Small blue rubber band

Sub-models (make these first)	
--------------------	
NAME	QTY	DESCRIPTION
mqshft1.dat	2	Quad_I - weight shift link
mqhipf.dat	1	"Quad_I - hip, front"
mqhipr.dat	1	"Quad_I - hip, rear"
mqpls.dat	1	Quad_I - pressure limit sensor
mqlnk2.dat	8	"Quad_I - leg link, type 2"
mqpv.dat	1	Quad_I - pneumatic valves
mq-leg.dat	4	Quad_I - leg
	NOTE:	"3739.DAT is used for the foot in mq-leg.dat , but this is not the part"
		that was used in the real model (it was the nearest I could come in the
		current LDraw parts catalog).  The part actually used was the wheel
		hub from the 8880 SuperCar

Main model (construct after making the sub-models)		
--------------------		
mq-all.dat		Quad_I - complete assembly
